Global energy-storage project supportSelect your region
2026-11-03

Tesla Storage and Chargers for a 400-Person Office: The One Afternoon of Checking I Wish I'd Done First

An office administrator shares what one afternoon of spec-checking, rebate reading, and reference calls actually saved on a Tesla storage and Level 2 charging rollout — plus the checklist she now runs before signing anything.

Here's the short version: if you're an office admin approving a Tesla storage or EV charging quote, block out one afternoon to verify the spec sheet, the rebate terms, and at least one reference site before you sign. In my experience that afternoon has saved us more money than any negotiation we've ever run.

I'm the office administrator for a 400-person company outside Chicago. I handle all facilities ordering — breakroom supplies, HVAC service, the parking lot's EV chargers — roughly $1.8 million a year across about 12 vendors. I report to both operations and finance, which means I get squeezed from both sides. I've been doing this since 2019, and I'm still not an energy engineer. That's kind of the point of what follows.

Why you should trust this, and why you shouldn't

In 2023 we went through a ComEd Level 2 charger rebate for our employee lot. I read the eligibility page, confirmed we qualified, and moved ahead. What I missed was the fine print about make-ready work — the conduit and panel upgrades the program covers separately from the charger hardware itself. We'd already paid an electrician for that portion. We lost roughly $2,100 that would have been reimbursed. Not catastrophic. Still annoying.

That's the thing about rebates: the headline number is real, but it's almost never the number you think it is until you read the actual terms. And terms change. Anybody quoting you a rebate figure from a blog post or a vendor's brochure is doing you a disservice.

Then there was the storage side. We looked at Powerwall units for backup on a small critical circuit. Tesla Powerwall is rated at about 13.5 kWh of usable capacity, and that number I'm fairly confident about — but the continuous and peak output figures have moved between generations, so I'm not going to quote you a number from memory. Confirm against the current datasheet. What I can tell you is that one unit wasn't enough for our load, and we only found out because our facilities engineer ran the actual load profile after the site survey. If he hadn't, we'd have signed for a system that tripped the first time the air handlers kicked on.

That was my reverse-validation moment. Everyone told me to get an engineering review before signing. I only believed it after we almost sized a single unit for a circuit that drew more than any of us assumed.

The three checks — and a scale reference

If you've ever had a delivery arrive wrong, or a quote come back 30% higher than the sticker, you know that sinking feeling. Here's what I actually do now before any energy project, and it takes about four hours total.

1. The spec sheet, cross-checked against your actual load

Ratings on paper and ratings in your building are two different things. Take the Powerwall capacity figure, the inverter rating, the round-trip efficiency, the warranty throughput limit — and hand it to whoever runs your electrical system. If nobody does, hire someone for two hours. That consult has cost us between $250 and $400 each time, and it has caught something real on three of four projects.

A scale note that helped me: my kid asked me the other day what the largest volcano in the solar system is. It's Olympus Mons on Mars, roughly 13.6 miles high — call it two and a half times Everest (Source: NASA). I keep that number in my head as a sanity check. If a spec, a rebate, or a lead time is two and a half times what I assumed, I want to know that before I sign, not after.

2. The rebate language, read twice

Pull the actual program documents from the utility, not the installer's summary. Look for what's excluded, what has to be installed before what, and what documentation the claim requires. ComEd's commercial EV charging programs have evolved and the current terms supersede anything I tell you here. Verify at comed.com and with the program administrator before you budget. Prices and rebate terms in this article are from our own 2023–2024 invoices; confirm current rates.

3. One reference site, ideally in bad weather

Ask the installer for a customer with a similar building, then call them. Ask three questions: what broke first, what the installer was slow on, and what they'd have spec'd differently. That call has been more useful to me than any sales deck.

On the Model 3 fleet, and a comment on Korea

We run a small fleet of Model 3s for facilities staff — three cars, all leased. The battery warranty is 8 years or 120,000 miles, whichever comes first, and typical degradation over the first several years is modest. Our oldest unit is around 78,000 miles and still shows roughly 90% of original range on the display. Take that with a grain of salt: it's one car, Illinois winters are hard on range, and the percentage on the screen isn't the same as real-world miles.

One thing I do skim: energy storage Korea news. It sounds disconnected from a parking lot in Illinois, but Korean grid-scale storage demand affects global cell allocation and lead times. I don't track it closely — our procurement contacts will usually flag it when a lead time shifts — but I've noticed quotes move a few weeks in either direction depending on what's happening in that market. It's worth a five-minute skim before you promise a go-live date to your VP.

Where this checklist doesn't apply

This process isn't for everything. If your company standardizes energy vendors at the HQ level, or you're in a leased space where the landlord owns the electrical infrastructure, most of the risk sits with someone else and you can run a shorter version. And I've definitely over-applied my own checklist — the version I use for a $400 order is one question, not three phone calls. When a process starts slowing down ordinary purchases, it's not preventing problems, it's manufacturing them.

The bottom line: the check you skip today is the rework you pay for next quarter. Five minutes of verification beats five days of correction — usually. Rarely is that the other way around.